12V 22mm Motorcycle Heated Grips Universal Electric Heating Handle Hand Warmer

Specification:
Origin: Mainland China
Material: Silicone
Color: Black
Dimensions: Right: 140mm, Left: 128mm
Cable Length: 220cm from handlebar to positive and negative terminals
Input Voltage: DC 12V
Power: (12V) Level 5 (Red): 30W, Level 4 (Orange): 26W, Level 3 (Yellow): 23W, Level 2 (Green): 19W, Level 1 (Blue): 15W, Neutral (White): 0W
Operating Temperature: -20°C to +50°C
Handle Type: Sealed Electric Heating Handle
Applicable to: Motorcycles (can be used with throttle cables)
Switch Type: Multi-level adjustable temperature control switch
Applicable pipe diameter: 22mm
Waterproof Rating: IP68
Switch Operation Instructions
1. The red wire is positive, the black wire is negative, and the yellow wire is the ACC line. Do not connect them incorrectly, as this may damage the product.
2. Single-tap to power on. Press and hold for three seconds to power off. Press again to switch gears.
3. The current gear is memorized during operation and even during power outages.
4. The switch has a temperature control memory function. It starts in the memorized gear (i.e., the gear it was in before it was turned off). It also provides intelligent and rapid temperature increase upon startup.
5. LED colors indicate different gears: 1st gear (red) 30W, 2nd gear (orange) 26W, 3rd gear (yellow) 23W, 4th gear (green) 19W, 5th gear (blue) 15W, and neutral (light purple) 0W.
5. Surge and reverse polarity protection; ACC control function.

Note:
Due to different monitor settings and lighting conditions, the actual color of the item may vary slightly from the pictures. Thanks for your understanding!
Please allow a 1-2 cm difference in measurements due to manual measuring.

Package Content:
1 Pair x Heated Motorcycle Grips
2 x Tail Plugs
5 x Cable Ties
5 x Throttle Cable Clips
1 x Hexagonal Wrench