150PSI Electric Tire Inflator USB Rechargeable 4000mAh Digital Wireless Air Pump

Specification:
Origin: Mainland China
Product size: 120.00x78.00x50.00mm/4.72x3.07x1.97inch
Working current: 1-5A
With USB countercurrent charging: 5V 1A
Input voltage: charger 5V, greater than 2A
Maximum current: ≤5A
No-load current: ≤2A
Battery capacity: 4000mA
Air efficiency: give 1.95 mountain bike tires for 2 minutes
Noise decibel: 60-80dB
Charging method: Micro USB
Proximity pressure: 150psi/10.3BAR/990KPA/10.5kg/cm
Input voltage: original 5V/2A
Battery model: 18650 lithium battery
Working temperature: -20℃ -50℃
Product functions: cars, bicycles, inflatable balls, night lighting
Emergency luminous brightness: 80LM for 10 hours
Charging time: about 3 hours
Display method: high-definition LED color screen display
Scene mode: car, ball, car switch
Instructions for use:
1. Insert the pin at one end of the charger into the USB in advance, and insert the other end of the USB plug into the USB socket at the top of the air pump to charge the air pump.The normal charging time is 4 hours after the first charge, and the thinner is fully charged each time
2.Turn on the power button, the LCD screen starts to display, press the switch button to switch between the four air pressure units of PSI, BAR, KAP, and KG/CM2, select the unit you want, and press the add or subtract button to set the content you need.Air pressure value, after the lighting stops, press the power button to start inflating, the bottom LED light is on when inflating, and the LED light will automatically light up after the automatic charging stops.
3.Just press the light button to switch between the car, the car and the ball.
Mode default 28PSI
Display driver mode default 36PSI
Display ball mode defaults to 80
4.After customizing the mode, short press-or+ to adjust the preset pressure value, and long press-or+ to quickly adjust the preset pressure value.
5.Press the power button to start the virtual.When the virtual pressure reaches the pressure value you set, the smart virtual machine will immediately stop virtual work, but the LED light is still on, and then press the power switch to turn it off.
6. After the installation is complete, tighten the lower trachea to complete
7. If you judge the tire Air pressure, you can use the tire pneumatic tire to deflate at the appropriate position on the valve core
8.Fasten the tire inflation pad from the host and insert it
In the storage tank at the bottom of the compressor, put the compressor away and place it in a dry, ventilated and safe place.

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.








Package Content:
1 x Air Pump
1 x Inflatable Tube
1 x Inflatable Accessory Connector
1 x USB Charging Cable