Buy 4 Get 1 Free | Free Shipping On Orders Over $59
1 / 12
3 in 1 Metal Detector AC Voltage Live Cable Wire Wood Pipe Finder Stud Locator Wall Scanner Detector with Audio Alarm
(1) The ergonomic non-slip handle provides comfort and operating tools.
(2) Intelligent microprocessor chip to obtain accurate and fast results.
(3) High-definition graphic LCD display audio alarm.
(4) The automatic calibration function provides users with the greatest degree of reliability.
Color(optional): Blue, Yellow, Green, Red
Battery power supply: AAA 1.5V X 3 (not included)
Stud detection depth: wood 30x30mm/1.18x1.18in : ≤18mm/0.71in
Metal detection depth: iron pipe 25mm/0.98in: ≤30mm/1.18in
AC live wire: AC 90-520V live wire (5cm/1.97in), frequency 50-60Hz
Working temperature and humidity: -7℃ - 40℃, <75%
Storage temperature and humidity: -20℃ - 50℃, <85%
Size: 155 (L) x 72 (W) x 28 (H) mm/6.1x2.83x1.1in
Accurate and Rapid: The stud finder adopts an intelligent micro-sensor chip with the highest sensitivity which can accurately and quickly find edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings. Fast detection saves users time and effort, making the task completion easier. No matter professionals, homeowner and DIY enthusiasts, it must be an ultimate choice.
5 in 1 Multi-function Detection: The upgraded 5 in 1 mode provides users with more detection needs. 1.27 cm scan mode locates the center and edges of wood and metal studs up to 1.27 cm deep; medium scan locates the center and edges of wood and metal studs up to 1 inch deep; Deep scan locates the center and edges of wood and metal studs up to 1.5inch deep; Metal scan detects metal (Ferrous and Non-Ferrous Metal) up to 6.0 cm deep; AC scan detects live unshielded AC wires up to 2 inches (about 5.1 cm) deep.
Digital LCD Display Audio Alarm: This stud finder comes with large LCD display and sound alarm, which can detect the exact location of the objects. When find the objects, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. This LCD also features back-lit function which can provides a clear appearance even in low light conditions, indicating detection mode, center pointing, low battery indication etc.
Easy to Use Auto Calibration: Easy-to-read LCD display and ergonomic anti-slip handle provide users with comfort and convenience while scanning. The wall detector can be automatically calibrated anywhere on the wall to successfully find the center of studs in one step. This function provides maximum reliability to the user, greatly reduces errors in the application, and ensuring that most objects behind the wall can be detected.
Wide Use: This stud detector quickly locates wood, metal and AC wires hidden in the walls, floors and ceilings of the house. It can work on different wall surfaces, such as lath, wallpaper wood flooring, acoustic ceiling, painted walls, etc. helping you avoid danger when installing TVs, cabinets, garage racks, etc.
How to use stud detector?
Step 1: Calibrate the tool before every scan
Choose the scan model at first, then place unit flat on the wall, press the power button to power on, press the Scan button(on the right side of the tool) to start calibration. Wait for the reducing bars disappears and beeps to confirm calibration has completed.
In stud/deep mode, put it on the wall where you want to detect to calibrate it ; In AC/Metal mode, put it in the air to calibrate it.
Tip: It is important to wait for calibration to complete (2-3 seconds) every time.
Step 2: Start to scan
After Calibration, then moves the stud finder along the wall slowly, The narrow on the screen together with the beep signal alter, guides you to find the location of the stud.
1. If shake or lift the scanner coincidentally, the device needs to be re-calibrate.
2.if you can not scan the object from left to right, please try to scan up and down.
Step 3: Find the location of the stud
When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object. Mark it with your pencil.
Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-3cm measuring deviation due to manual measurement.