4 sold
3 in 1 Soil Water Acidity Humidity Light Sensor Portable Soil Moisture Sunlight pH Meter Tester for Garden Plant Flowers Testing Tools
Specification:
Material: Plastic
Product size: 260*62mm
Probe length: 20.5cm (can not be measured directly in the water)
Product function: humidity detection, PH value detection, light detection
Product instructions:
First insert the probe into the soil as deep as possible, and the probe should be inserted into the soil at a position greater than 10cm of the probe.
1: Move the key on the pen to MOIST. MOIST is the moisture key, the corresponding table is MOIST, DRY is dry, and WET is wet.
Values 1-3 (red part) indicate that watering is required;
The value of 4-7 (green part) is suitable, please adjust the watering time according to the variety of the plant;
A value of 8-10 (in blue) is too wet.
2: Toggle the key on the pen to LIGHT. LIGHT is the illuminance. The measurement range is 0-2000. The larger the value, the stronger the light. Please decide whether you need shade according to the variety of the plant.
3: Turn the key on the pen to PH. PH is the pH key, the corresponding table is 8-3.5 value, ALKALINE is alkali, ACDIC is acid, the value is 7 is basically neutral, the smaller the value, the higher the acidity, please adjust the pH of the soil according to the variety of plants.
Note:
When using, be careful not to touch the stone when inserting the electrode, and do not use too much force, otherwise it will easily damage the electrode. Wash the electrode after use.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1* Soil detector
