Buy 4 Get 1 Free | Free Shipping On Orders Over $59

1 / 9

433MHz Superheterodyne Wireless Receiver Module Support 1527/2262 Encoder

$3.70
$3.70 0% Off Save $0.00
Only left in stock
people are viewing this right now
Get it between days - days
Sku: 179771
Barcode:
Other people want this. Over people have this in their bags right now.
Features:
Work Voltage: DC2.5V-5V
Work Current: 3mA
Sensitivity: -108DBM
Speed: Max 10 KB/S
Support Decoder: EV1527, PT2262, etc
Work Mode: inching, self locking and interlock
Output: 4 CMOS level signal corresponding to the remote control \"ABCD\" buttons
Supported Remote Control Quantity: 24

Instruction:
Code clearing:
Press the button under 8, and the LED goes out. LED flashes 8 times and clears OK.
(with a remote control to change the work mode, please clear code to learn)

Learning pair code:
Step 1: press the learning button of the decoding module according to the required number of working modes, and the LED lights of the decoding module are lighted.
(jog mode: according to the 1 key learning and decoding module.
Self locking mode: press the 2 key learning and decoding module.
Interlock mode: press 3 key learning decoding module.
2 point +2: according to the 4 way self-locking decoding module learning key.
2 Road Road interlocking self-locking +2: according to the 5 key learning and decoding module.
2 point +2 road interlocking: according to the 6 decoding module learning key.
2 Road +2 road interlocking interlocking: according to the 7 decoding module learning key).

Step 2: press any key of the remote controller, after the decoding module receives the signal, the decoding module LED lamp flashes three times, then extinguishes, and succeeds to the code.
If you don\'t have a remote control signal after entering the learning code mode, you will automatically withdraw from the learning code mode after 10 seconds

Working model introduction:

1. points move: press the remote controller, decoding module instantaneous output level signal, that is the point action mode.
Setting method:
Step 1: according to the study 1 key decoding module, decoding module of the LED lamp light.
Step 2: press any key of the remote controller, the decoding module receives the signal, the decoding module LED lamp flashes three times, then off, sets successfully.

2. self-locking: press the remote controller, the decoding module continues to output level signal, and then press the remote controller, the decoding module stops the output signal, that is the self-locking mode.
Setting method:
Step 1: according to the study 2 key decoding module, decoding module of the LED lamp light.
Step 2: press any key of the remote controller, the decoding module receives the signal, the decoding module LED lamp flashes three times, then off, sets successfully.

3. interlock: press the remote controller, the decoding module continues to output the level signal, and then press the remote controller is different, the decoding module changes the output channel, that is the interlock mode. For example: press the remote control A key, decoding module D0 pin output signal, press the B button, decoding module D0 pin to stop the output signal, change to D1 pin output signal
Setting method:
Step 1: according to the study 3 key decoding module, decoding module of the LED lamp light.
Step 2: press any key of the remote controller, the decoding module receives the signal, the decoding module LED lamp flashes three times, then off, sets successfully.