Specification:
Certification: NONE
Origin: Mainland China
DIY Supplies: ELECTRICAL
Display Type: Analog Only
Model Number: RF Bias Tee
Dimensions: 60 x 23 x 7mm/2.4 x 0.9 x 0.3inch
Working frequency frequency: 10MHZ-6GHz
Insertion lossInsertion loss: <1.2dB
Working voltage: DC 1-50V
Maximum operating currentNormal operating current: <0
Working Principle:
Broadband amplifier feeder circuit, high frequency by the parasitic capacitance parameters, the performance of a sharp decline, so the feeder needs to use the BiasTee. BiasTee by the ultra-wideband, near-idealised high-frequency inductors and capacitors without resonance points. DC blocking capacitors: DC blocking to prevent DC voltage leakage to subsequent circuits or test instruments. High-frequency inductors: isolate AC information and prevent leakage of high-frequency signals into the power system.
Scope of application:
1. Some broadband amplifiers do not have DC blocking capacitors inside and therefore need to supply power to the output. Deviation is required. Some amplifiers have internal isolation capacitors, thus eliminating the need for additional bias
2. drive current required for fibre-optic communication, laser drive laser diodes is injected through the biased DC terminal; communication data is injected through the RF side
3. optical modulation drive
4. Other test and measurement applications
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:1 x RF Bias Tee