Specification:
Certification: NONE
Origin: Mainland China
DIY Supplies: ELECTRICAL
Display Type: Analog Only
Model Number: RF Amplifier Module
Dimensions: 52 x 24 x 5mm/2.0 x 0.9 x 0.2inch
Operating frequency: 5-3500MHz
Amplification gain: 20dB (typical)
Noise figure: 1.3 (typical)
Amplifier gain:
F=5MHz, gain=23dB
F=30Mhz, gain=23dB
F=100MHz, gain=23dB
F=150Mhz, gain=23dB
F=420MHz, gain=22dB
F=1500MHz, gain=20dB
F=3000MHz, gain=18.7dB
F=3500MHz, gain=17.6dB
High output power: +20dBm (100mW) @ 1dB compression point
Operating current: 80mA (5V)
Supply voltage: 3.3-6V DC
System impedance: 50 ohms
Product Application:
This amplifier in the original 30-3000MHz amplifier based on the re-optimized design, so that it has a wide frequency range, stable gain, small noise coefficient, dynamic range (+20dBm @ 1dBP) and other advantages, especially suitable for a variety of RF receiving front-end circuit, to increase the communication distance! Widely used in shortwave, FM radio, remote control receivers, cable TV signal amplifier, BeiDou, GPS satellite navigation, 2.4G Bluetooth, WIFI receiver RF front-end and other places that need low noise and small signal RF amplification!
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:1 x RF Amplifier Module