Specification:
Origin: Mainland China
Use: Switch
Wireless Communication: RF
Frequency: 433 MHz
Power scheme: AC220V
Standby current: 3mA
Good selectivity and spurious radiation suppression
Equipment adaptable temperature range: -20-70℃ (even in harsh ambient temperatures can work normally);
Product size: 38x46x27mm/1.81x1.5x1.06inch (excluding case)
Product weight: 42g
Operation function description:
(1) Learning code code operation:
Tap mode: firstly remove the cap jumper on the controller, connect the power supply and tap the controller to learn the code key, then press and hold any key of the remote control, the indicator light of the controller blinks to show that it learns the code successfully.
Automatic mode: use the cap jumper to short the mode pin G and T on the controller, connect the power supply and press the controller to learn the code key, then press and hold any key of the remote control, the controller indicator light will blink to show the success of learning the code.
Interlocking mode: Use the cap jumper to connect the mode pins G and L on the controller, connect the power supply and press the controller to learn the code, then press and hold the A key of the remote control, the controller indicator light flashes to show that the code is learnt successfully. After learning the code, press the following key A to close the relay, and press key B to disconnect the relay.
(2) Working Mode Explanation:
Tap mode: press the key to activate the relay, release the key to deactivate the relay.
Self-locking mode: Press the key which has learnt the code, the relay will be activated, press the key again and the relay will be deactivated.
Interlocking mode: Press the remote control button A, the relay is active, press the button B, the relay is disconnected, and press the button A again, the relay is active.
(3) Clear code operation:
Press and hold the key of learning code for 5 seconds, the indicator light turns from off to on successfully, and all the remote control codes are cleared.
Rated voltage: AC220V
No-load current: 3.5mA
Receiving frequency: 433.92Mhz
Working mode: point action, self-locking, interlocking mode
Output mode: terminal
Control distance: >100m (high power remote control measured in the open)
Receiving sensitivity: -105dB
Maximum load power: 1000W
Precautions:
(1) The working voltage should not exceed the rated voltage.
(2) Keep it out of the reach of children.
(3) The control distance may be reduced in an environment with high wireless interference.
(4) Prohibit the use of the controller in a humid environment, otherwise it may cause damage to the controller.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:1 x Remote Control
1 x Receiver