Specification:
Fuel: Gas
Usage Condition: Normal Outdoor
Structure: One-Piece
Piece Number Of Wind Deflector: No wind shield
Type: Switch Tool
Model: Flat Tank Inflation Valve
Name: Direct-connected flat tank inflation valve
Material: Copper, Zinc Alloy, Aluminum Alloy
Color: As picture
Product size:About 115x110x20mm/4.53x4.33x0.79in
Net weight: 100g
Inflation steps and precautions (note that the operation of liquefied gas is dangerous, please be sure
to operate in an open space outdoors and operate with care):
1. Install the empty bottle of the cassette gas tank on the inflation valve.
2. Confirm that the inflation valve switch is closed tightly.
3. Put the liquefied gas cylinder that meets the national standard
upside down on a stool or other stable table with a height difference of
more than 20CM (confirm that the switch of the liquefied gas cylinder
is closed tightly)
4. Install the inflation valve with the cassette air tank installed on the liquefied gas cylinder.
5. After the place is stable, first turn on the switch of the liquefied
gas cylinder, and then turn on the switch of the inflation valve to
start inflation (please control the inflation time, do not overfill, the
inflation capacity of the cassette gas bottle is generally recommended
to be within 180 grams, approximately After charging for a while, you
can take off the gas tank and weigh it to confirm whether the weight of
the gas tank is excessive).
6. At the end of inflation, first turn
off the switch of the liquefied gas cylinder, then turn off the switch
of the inflation valve, and then remove the inflation valve and the
cassette gas tank in turn.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:1 x Flat Tank Inflation Valve