Specification:
Origin: Mainland China
Model: XH-M139
Material: Electronic components
Chip selection: TPA3116D2 * 2
Power supply voltage: DC12-24V
Output power: 200W (50w * 2+100w bass * 1)
Signal to noise ratio: 100db
Output load: 4-8 ohm
Frequency response range: 14-100KHZ
Number of channels: 3 (left channel+right channel+bass)
Switching frequency: 1.2MHZ
Size: About 100x80x28mm/3.93x3.14x1.10inch
Weight: 118g
Kind reminder:
Only when the audio input is sufficient and the power supply voltage/current is sufficient can there be sufficient output power. The higher the power supply voltage, the higher the relative power, and the horn with different impedances will have different output power. When the voltage and current are sufficient, the larger the ohm number of the horn, the lower the relative sound power. Please pay attention!
Power supply voltage:
12V - 8 Euro speaker/12W (left channel)+12W (right channel) 4 Euro speaker/20 (left channel)+20W (left channel),
15V - 8 ohms/18+18W, 4 ohms/greater than 30+30W,
19V - 8 ohms/32+32W, 4 ohms/greater than 45+45W,
24V - 8 ohms/38+38W, 4 ohms/greater than 55+55W,
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:1 x Amplifier Board Kit