Product main material: ABS
Net weight: 390g
Input voltage: 220-240V
Car charger: DC12V
Use power: 130W
Plug type: UK
This air pump is a large flow low pressure pump, suitable for inflatable beds, car inflatable cushions, inflatable sofas, inflatable toys, tumblers, horse toys, yoga balls, kayaks, inflatable boats, swimming pools, swimming rings, vacuum storage bags, etc.
It cannot be used to inflate tires, football basketballs, rubber balloons and air column bags. For these products, please purchase a dedicated air pump.
1. Connect the pump to the 220V power supply.
2. Connect the inflatable accessories to the inflation port, open the switch to start inflation ("-" means open-start inflation, "o" means close-stop inflation).
3. Be careful not to block the inflation valve, otherwise the pump may be damaged due to overheating.
4. Be careful not to use the suction port to inflate.
1. Open the suction port of the object to be suction.
2. Connect the appropriate accessories to the suction port of the vacuum pump (if the size of the suction port on the pump is just right, the three accessories are not needed). Connect the interface, then open the switch to start pumping ("-" means open to start pumping, "o" means close to stop pumping).
3. Be careful not to block the exhaust valve, otherwise the pump may be damaged due to overheating.
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.