Electric Heating Pad 3 Gear Motorcycle Seat Heated Mat Smart Temperature Control

Specification:
Origin: Mainland China
Model Name: Motorcycle Seat Heater Pad
Special Features: Waterproof and Anti-slip
Input voltage: DC12V
Output power: 10W
Product line length: 128cm/50.39inch
Material:
Top fabric: PVC leather
Bottom composite fabric: microfibre + TPU + sponge + backing cloth
Product use scope: can be installed in the motorbike, 12V electric car use
Wiring method: red to the positive pole, black to the negative pole, ACC line connected to the door lock (connected to the reverse light does not light, only heat)
Product power value: first gear (red): 100%, second gear (blue) 70%, third gear (green): 40% (the above data are obtained by the experiment, the specific value or due to voltage, environmental and other objective factors, such as the change of a slight fluctuation, for reference)
Wiring instructions: please refer to the product manual
Switch operation instructions:
1.power on / off: (open the power) long press the power switch, the switch itself will light up red, power on; (power off) long press the lighted power switch, the switch goes out, power off!
2.temperature adjustment: after turning on the power, red, blue and green alternately flashing quality control switch, long press 3 seconds to switch on, the switch lights up red, strobe for 5 minutes, the temperature in this state is set to the highest grade, 5 minutes after the automatic change to mid-range (blue light), each time you press the switch, high-grade (red) - mid-range (blue) - low-grade (green)

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.

Package Content:
1 x Seat Cushion
1 x Power Cable
1 x Instruction Manual
3pcs x Ties