Buy 4 Get 1 Free | Free Shipping On Orders Over $59
1 / 8
Heating and cooling mode setting
(1) Starting temperature ＜stop temperature = heating mode, for example, if your want to control heating water, when water is heated to 60 ℃, it stops heating; and when the temperature dropped to 45 ℃, it again starts heating.
Setting method: Set starting temperature to 45 ℃ and stop temperature to 60℃
(2) Starting temperature ＞ stop temperature = cooling mode, for example, if you want to control greenhouse heat dissipation, when the temperature is higher than 35 ℃, it will start ventilation fan, and when the temperature is down to 32 ℃ it will stop.
Setting method: Set the starting temperature to 35 ℃ and set the stop temperature to 32℃
Product Type: XH-W1411
Temperature range: -55 ~ 120 ℃
Temperature measurement accuracy: ± 0.3 ℃
Temperature range: -19 ~ 99 ℃
Temperature control accuracy: 1 ℃
Temperature measuring probe: NTC10K / B3950 (standard 1 meter waterproof probe)
Power supply voltage: DC 12V / 100-240V
Display color: yellow + red
Applicable environment: -25 ~ 55 ℃
Humidity: 20% -85% (no condensation)
Output type: 10A relay output
Panel size: 90 x 60mm/3.54 x 2.36\"
Hole size: 70 x 50mm/2.76 x 1.97\" (M3 screw hole, 80mm pitch)
1. Fix the motherboard and plastic panels with a fixing column and lock the nuts;
2. Connect to the power supply and load control lines;
3. Punch a 70 x 50mm hole, insert the thermostat, and lock up screws, then stick a film;
4. Put the temperature control probe into places that need to control temperature; set starting and stop temperature according to your need;
This product adopts single-chip microcomputer control system and high-precision temperature control probe. It has superior performance in temperature control and temperature control accuracy compared with similar products. The three display monitor human design enable real-time start value and stop value. It also has intermittent work and timing switcher functions. And it is widely applied in incubator box temperature control, equipment temperature control, case temperature control, cooling temperature control, temperature control protection and other areas.