EASTER DAY Presale | Buy 2 Get 10% OFF | Free Shipping On Orders Over $59
1 / 14
Universal ATV UTV Winch Guard Cable Stopper Hook Bump Stop Line Saver + Hex Wrench
1. This winch guard is made of nylon, long service life;
2. With 4 solid iron screws. The surface of these screws is covered with zinc, which can effectively prevent oxidation and corrosion.
Size: Diameter: 64mm/2.52", inner diameter: 13mm/0.51"
Product material: nylon + iron
Product color: black
Applicable model: for most ATV/UTV winch off-road vehicles
Scope of application: suitable for steel roller fairleads/aluminum spline fairleads, steel cables or synthetic ropes
Product function: It can eliminate the rattling and vibration of the hook/guide when sliding, protect the winch motor and gear from pulling the cable too deep or making the roller bottom, and maintain the tension on the hook to prevent the cable from loosening .
Installation position: between winch cable and hook
1. Take out the pin of the hook, and then unplug the hook from the cable;
2. Just install the rope or cable between the two halves;
3. Insert four bolts, and then tighten them with an Allen key;
4. Put the hook back to the end of the cable or rope. Contact the contraction on the clutch and shaft until the hook is on the hook and the ball;
5. Please position the hook stopper at approximately 3/4 of the hook length when the winch is used.
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.