Specification:
Certification: NONE
Origin: Mainland China
DIY Supplies: ELECTRICAL
Display Size: 2.9 Inches Under
Model Number: Mini Shortwave Power Meter
Frequency range: 1.6MHz-30MHz
Power error: ±5%
Maximum measurement power: 100W
Standing wave display range: 1.0~10
Insertion loss: <=0.1dB
Impedance: 50Ω
Display: 2.23 inches 128*32 resolution orange OLED screen
RF connector: SL16-KF (M-KF) female seat
Charging port: 5V (micro usb) 200mAh
Power Consumption: <=50mA (average)
Battery: 8.4V350mAh polymer lithium battery
Shell material: metal + ABS
Dimensions: 118x35x26mm/4.64x1.37x1.02inch (maximum size)
Note: The standing wave meter is assembled by DIY, and it is inevitable that the appearance will be flawed.
Instructions:
The M socket on the left side of the standing wave meter is the input terminal (connected to the radio station), and the M socket on the right side is the output terminal (connected to the antenna). Turn the power switch on the right side of the standing wave meter. When the standing wave meter starts up, it will first display the world map, then display the version number and battery power (just for reference), and then enter the main measurement interface. At this time, the standing wave and the corresponding signal will be displayed. power value.
Charging LED indicator, always on during charging, and off after charging. When there are input overvoltage, output undervoltage and overvoltage, output short circuit, charging time overtime, it will flash at a frequency of 1.6Hz
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:1 x Mini Shortwave Power Meter
