Item Type: Grips
Origin: Mainland China
Model Name: Motorcycle Hand Heated Grips
Product colour: black
Handle length: left handle: 125x35mm/4.92x1.38inch; right handle: 127x35mm/5x1.38inch
Handle diameter: 22mm
Input voltage: 12V
Handle Type: Sealable and pass-through electric handle
1. Remove the original handlebar.
2.Wet the inside hole of the left handlebar with soapy water, and do not twist it too much when installing it.
3. When installing the balance iron on the left handlebar, adjust the position of the balance iron to slightly separate from the handlebar, and do not squeeze the handle when tightening the screws.
4. If the left handlebar slides on the steel pipe during use, remove the balancing iron and fix it with a few drops of 502 glue from the end of the handlebar.
5. Connect the red wire to the positive pole and the black wire to the negative pole (not reversed).
6. When installing the left handlebar, the power cable should leave enough margin for rotation.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
1set x Motorcycle Hand Heated Grips