Specification:
Origin: Mainland China
Type: Module
Condition: New
Model Number: Range Current Sensor Board
1. This current sensor is a carrier or branch board for Allegro\'s ACS715LLCTR Hall-effect based linear current sensor.
2. the sensor operates at 5 V and has an output sensitivity of 133 mV/A.
3. The board is shipped from the factory fully populated with its SMD components.
4. designed for unidirectional input currents from 0 to 5 A, but the sensor will provide meaningful feedback for currents up to -1.5 A and the rugged IC can withstand currents up to five times the overcurrent condition.
5. The internal resistance of the conductive path is typically 1.2 mΩ and the PCB is made of 2 oz. copper, resulting in minimal power loss on the board.
6. The use of Hall effect sensors means that the IC can electrically isolate the current path from the sensor\'s electronics (high 2.1 kV RMS), allowing the sensor to be plugged in anywhere along the current path and used for isolation in applications where electrical isolation is required.
7. 80 kHz bandwidth can optionally be reduced by adding a capacitor between the circuit board pins labelled \"filter\".
8. High accuracy and reliability: Typical total output error of ±1.5% at room temperature with factory calibration, extremely stable output offset voltage, and near zero hysteresis.
9. Automotive grade operating temperature range of -40°C to 150°C
Operating voltage: 5V
Output sensitivity: 133 mV / A
Operating temperature range: -40°C to 150°C
Product size: 20x17x3mm/0.79x0.67x0.12inch
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:1 x Range Current Sensor Board
