Specification:
Origin: Mainland China
Output: Switching Transducer
Model Number: Touch Switch Module
Theory: Capacitance Sensor
1. This product is a capacitive touch switch sensor module.
2. Under normal conditions, the module outputs a high level; when touching the sensing area with a finger, the module output switches to a low level.
3. The sensor can be installed in such as plastic, glass and thin surface (non-metallic) surface.
4. The sensing area can be touched on both sides of the surface, and the touch detection effect can be widely used in different areas of demand.
Product features:
Power supply can be: 3.3V~5.5V DC
Typical value of 1.5uA in low-power mode, maximum value of 3.0uA.
Output mode: touch - low level, no touch - high level (similar to soft touch buttons)
Both front and back sides can be used as touch buttons, variable area buttons instead of traditional buttons
Wiring: 4P/3P pin interface
Product size: 38x23x9mm/1.5x0.91x0.35inch
Hole diameter of pcb board: 4.2mm
Hole spacing: 16mm
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:1 x Touch Switch Module
