Specification:
Origin: Mainland China
Model Number: Car Paintless Dent Repair Tools
Material:Plastic+Metal
Puller size: 14 x 19cm/5.5 x 7.5inch
How to use:
1. Clean the dent with a clean damp cloth;
2. Insert the glue stick into the glue gun, pull the trigger to make the glue stick enter the glue gun, connect the power supply and warm up for 5 minutes;
3. Use a suitable hood gasket. A large dent requires a large exhaust shim;
4. Pull the trigger and apply the drawing pad with extruded glue;
5. Fix the drawing pad with hot melt glue in the center of the dent, press lightly until the glue hardens and sticks;
6. Align the T-shaped repair tool and press the hot melt adhesive pad, pull the slide bar back to tighten the dent;
7. After the dents are repaired, use 95% alcohol to scrape off the remaining adhesive on the surface of the car body with a plastic spatula;
8. If the dent still exists, lightly tap it with a leveling hammer;
9. Repeat the above steps until the dents are gone.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:1set x Car Paintless Dent Repair Tools
