Origin: Mainland China
Use: Electric Door
Wireless Communication: RF
Model Number: Copy Remote Control
Frequency: 433 MHz
Number of buttons: four buttons
Type: Wireless remote control
Application: such as electric retractable door remote control, road gate remote control, alarm remote control, etc.
Rated voltage: 12V 27A ,Battery (included).
Wireless transmission distance: 50-150 (metres). (Open space)
Multi-functional, multi-variable, personalised, user-friendly and simple design, quick to get started.
This smart copy remote control is suitable for electric door remote control, retractable door remote control, garage door remote control.
Clone chip type:
2260(PT2260,SC2260,LX2260,HX2260);2262,(PT2262,SC2262,LX2262,HS2262,HX2262),PT2264,PT2240(LX2240),1527(EV1527,HS1527,HX1527),FP527 ,CS5211,SMC918,SMC926,AX5026,AX5326-3,AX5326-4 HT680,HT6207,HT6010,HT6012,HT6013,HT6014,HT12D,HT46F49E,PIC16F629,PIC16F630,and so on. Different chip manufacturers have different prefix chip models, as long as the numerical part of the chip is the same model number.
Note: We usually do not recommend copying rolling code chips because there are many uncertainties when copying rolling code chips. When copying a rolling code chip remote control, it is impossible to tell whether the original remote control chip is encrypted or not. Therefore, we do not recommend copying the rolling code remote control.
1. Clear code: two fingers press and hold the unlock button and lock button at the same time; LED light flashes 3 times rapidly in about 2 seconds; release one finger (the other hand can\'t be released), and then click three times rapidly on the loose button with the loose finger until the LED light flashes rapidly; the two fingers can be released; and then press any one of the keys of the remote control; when the LED light is off, it means that the code is cleared successfully (all the four keys are empty); if you press the remote control, it will be cleared successfully (all the four keys are empty); if you press any one of the keys of the remote control, it will be cleared successfully (all the four keys are empty). If the light is still on after pressing any key of the remote control, it means that the original code has not been cleared successfully. If the light is still on after pressing any key of the remote control, it means the original code has not been cleared successfully, and you need to clear the code again. You can clear and clone the code repeatedly.
2. Copy: hold the original remote control in your left hand, hold our cloned remote control in your right hand, the two remotes are as close as possible; press the first key of the two remotes at the same time; after about 2 seconds, the LED light flashes twice; after one second, the light continues to flash, release your finger; press the key again after successful learning, the light is always on, which means that the first key code on the original remote control is copied to the other remote control; the same method can be done sequentially Open the second key, the third key ...... If the copy is successful, the remote control function is the same as the original remote control.
3.Recovery: When you accidentally clear the copy of the remote control code, you can press the copy of the two keys at the bottom of the remote control at the same time, the LED light will flash rapidly, press any key and release it, it will be long bright, this indicates that the remote control code has been recovered. Please make sure to remove the existing code from the remote control before using our duplicate remote control.
4. How to deal with the situation that some buttons can be controlled and the rest cannot? You can use CLEAR and RESTORE operation as follows:
(1) Clear the code first;
(2) After clearing the code, copy the unsuccessful keys again, the rest of the keys need not be copied;
(3) Then clear the code again;
(4) Restore the code; at this point, the original key that was not successfully copied is now overwritten by the new code, and the original key that was successfully copied is now retained. If the key is not copied after the second copy, repeat the above steps until all keys are copied successfully.
1. The prerequisites for selecting the remote control: the original remote control functions normally, the remote control chip is the same or compatible, and the remote control operates at the same frequency.
2. the remote control can only copy the fixed code, learning code chip and part of the microcontroller remote control (see the copyable chip model for the copyable chip model).
3. two-way remote control, rolling code remote control, microcontroller encryption programme remote control can not be copied. Such as HCS200, HCS201, HCS300, HCS301, etc. 4.
4. Before copying the remote control, please make sure that the existing password on the remote control has been cleared, and check whether the password is cleared successfully. Otherwise it cannot be copied.
5. Please make sure your remote control has enough power and the distance between two remote controls is as far as possible! If the copying distance is too close, switch to a different angle for copying. Press and hold the button on the original remote control, the sending signal is completely normal, then press the button on the remote control to make sure the function is completely copied!
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
3/5/10pcs x Copy Remote Control