DC-AC Step-up 12V to 110V 220V Inverter Board 150W Converter Transformer

DC-AC Power Step-up 12V to 110V 220V Inverter Boost Board 150W Converter Transformer

DC-AC Converter Input 12V to Output 110V 200V 220V AC 150W Inverter Boost Board Transformer

Specifications:
Material: Electrical components
Color: As pictures
Power: 150W
Input voltage: DC12V
Output voltage: AC 0-110V-172V-200V-220V
Quiescent current: about 0.05A
Output waveform: high frequency square wave
Output frequency: about 20KHZ
Protection: none
Output wiring the following voltages:
V0--V2=110V
V0--V3=175V
V0--V4=200V
V0--V5=220V
V5--V4=20V
V5--V3=45V
V5--V2=110V
V4--V3=28V
V4--V2=90V
V3--V2=62V

Warm Tips:
1. The board belongs to high frequency square AC output; it is not suitable for the inductive appliance, such as motor, fan and coil transformer.
2. While picked up with low-load machines (LED light, mobile phone charger and DVD set-top box), you are suggested to pick up with low voltage point, such as: 172V/110V.
3. You should install a large heat sink to release its long time high-load (≥100W) work.
4. You could not connect the power inversely. Besides, power supply and power wire should have large enough current.
5. Do not overload and short-circuit because it without any protections.
6. The number in measured by the output high frequency non-load voltage meter will be a little higher.

Note:
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.


Package Content:
1 x DC-AC Converter Boost Board Transformer