Specification:
Origin: Mainland China
Type: Module
Condition: New
Model Number: DC Motor Controller Module
0/Standard version: short time trigger, motor runs continuously until a stop signal or reverse signal is given
P0 standard version -self-locking, the signal is triggered only once, the module self-locking has been running.
When encountering reversal signal during forward rotation, it stops immediately after 0.3 seconds and then enters reverse rotation.
Limit signal has priority, it stops immediately when it encounters positive limit signal during positive rotation.
Positive (reverse) rotation cannot be started when there is a positive (reverse) rotation limit signal.
Positive and negative signals are valid when they are low, i.e. shorting to 0V level (negative power supply) will start.
The limit signal is normally open. (e.g. positive rotation cannot be started when SW1 is closed or connected to low level)
Voltage (optional): DC 12V, DC 24V
Module power consumption: 1.0W (no load motor), static standby 0.1W
Signal input: low level valid, input for optocoupler negative pole, voltage below 2V.
Response speed: 20ms (milliseconds)
Output current: standard 30A, optional 40A
PCB size: 60x30x20mm/2.36x1.18x0.79inch
Action life: more than 100,000 times
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:1 x DC Motor Controller Module