Specification:
Origin: Mainland China
Demo Board Type: ARM
Product size: 105.00x78.00x5.00mm
Product size: 4.13x3.07x0.2inch
describe:
Expansion board usage instructions
1. The power circuit of the expansion board adopts a 2A current design, which is limited by the PCI interface current limit (5V1A) for Raspberry Pi 5 and can provide an output of more than 3.3V1.5A to the solid-state drive.
2. Usually the rated current of SSDs can be 2.5A, 2.7A or even 3A, but these currents correspond to the limits of X4 mode
3. Since for Raspberry Pi 5 only supports X1 mode, the actual current used is much less than the rated current. Our design meets the needs of most hard drives.
Product introduction
for Raspberry Pi 5 motherboard has a built-in PCIE expansion interface. This product is suitable for PCIE external M.2 solid-state drive expansion.
1.Support booting from NVMe SSD and storage expansion
2.SSD can also be used alone for storage expansion, and the system boots from the Tf card
3.Support 2242/2230 size SSD
4. Support PCle x1, support Gen2 and Gen3 mode
5. Onboard power indicator (PWR) and M.2SSD activity indicator (ACT)
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:1 X Expansion Board (Model Optional)
1 X Connecting Cable
1 X Fixed Copper Pillar
