LS Billet Aluminum Oil Diverter Barbell for LS1 LS2 LS3 5.3 LSX LQ9 LS4

Descriptions:
The Oil Galley Barbell in your LS based engine is something that is over looked. And yet it serves a very important mission of directing oil to the oil filter. If oil leaks pass the Barbell it will go unfiltered directly to the Cam Bearing, Lifters, Crank and Rod Bearings. The factory Barbell is approximately .020± to loose so particles as big as 500 Microns can leak pass the factory Barbell. Your oil filter will filter out approximately 25 Microns depend on the brand of filter. Our 7075 Aluminum Precision Billet Barbell fits with approximately .001± clearance which will let only about 20-25 Microns pass by, that is the same as the filter.

New Tapered Design (See Photos) improves oil flow!

Another important part is the shaft of the Barbell. The oil has to flow around it to get though to the oil port. Our Billet Barbell has a 30% smaller shaft for much less flow restriction.

We have also added a 1/4-20 threaded hole in the end of our Barbell for easy removal. Just screw a 1/4-20 bolt in and pull the barbell out. No more digging and prying to get the factory one out.

Because our Barbell is such a precision fit, we hand check every one on a jig for perfect fit. Not to loose and not to tight. It cost more to keep our perfect tolerances! We doubt the copy cat companies do that!

Better engine protection from much less and smaller particles bypassing, smaller less restrictive shaft for better oil flow, replaceable High Temperature O ring and for ease of service a threaded 1/4-20 hole.

Specifications:
Condition: New
Brand: Unbranded
UPC: Does Not Apply
Manufacturer Part Number: Does not Apply
Size: 120*80*20mm/4.72*3.15*0.79\"
Weight: 13.5g

Notes:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.

Package Content:
1 X Oil Diverter Barbell