Specification:
Origin: Mainland China
Product options: Without Cable, With Cable (optional)
Product chip: CH340G
Working voltage: 5V
Input voltage: Recommended 7-12V, limited to 6-20V
Digital I/O pins: 54 (15 of which provide PWM output)
Analog input pin: 16
DC current of each I/O pin: 40MA
DC current of 3.3V pin: 50MA
Flash memory: 256KB, of which 8KB is used by the boot loader
SRAM: 8KB
EEPROM: 4KB
Clock speed: 16MHZ
Size: About 101.2x53.3mm/3.98x2.09inch (measured manually)
Weight: 36.6g (measured manually)
Usage method:
Plug in the 2560 development board and the driver will automatically install
Select board MEGA2560 in die
Select the COM port, which can be checked on my computer. Just now, the port in your 2560 development board
First, select the routine program that comes with Ard and burn it in
Mega\'s power supply system has two options: USB direct power supply or external power supply.
The selection of power supply will automatically switch. External power supply can choose from AC to DC adapter or battery. The limit voltage range of this control board is 6V~12V. However, if the provided voltage is less than 6V, the I/O port may not be able to provide a voltage of 5V, resulting in instability; If the voltage provided is greater than 12V, the voltage regulator may experience overheating protection and more likely damage to the MEGA. Therefore, the recommended operating power supply is 6.5-12V, and the recommended power supply is 7V or 12V.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:1 x Development Board
(Without/With Cable)
