Specification:
Origin: Mainland China
Type: Module
Condition: New
Supply Voltage: 3.3V to 5.5 V
Model Number: NFC RFID Module
1. Based on PN532 chip, it is used for 13.56MHz near-field communication.
2. The module is equipped with on-board antenna, no need for external antenna coil, the module is compatible with SPI, I2C, UART interface for communication.
3. With the NFC library supporting Arduino and Raspberry Pi, it can be easily used for the development of NFC-enabled products.
4. Support SPI, I2C and UART interface selection switch.
5. Effective communication distance is within 5cm.
6. Can be used for 13.56MHz contactless communication.
7. Compatible with ISO14443 Type A and Type B standards.
Attention:
1. Pay attention to the wiring according to the diagram, do not connect the wrong.
2. The power supply voltage should not exceed 5V, otherwise the module will be damaged.
3. When wired for use with microcontroller and other devices, set the dip switches to select the desired communication method.
Working voltage: 3.3V
Size: 42x40x5mm/1.65x1.57x0.2inch
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:1 x NFC RFID Module