Specification:
Origin: Mainland China
Use: Switch
Wireless Communication: RF
1 Overview
AK-RK01SP-220 large suitcase controller adopts main control chip programming, with low power consumption, convenient single-button operation, diverse working modes, and simple and easy to use code matching operation. It can be used in lighting control, smart home and other control scenarios.
2. Product features
(1) Working frequency: 433.92MHz;
(2) Power supply solution: AC220V;
(3) Standby current: 3mA;
(4) Good selectivity and spurious radiation suppression capabilities;
(5) Equipment adaptable temperature range: -20-70℃ (can work normally even in harsh ambient temperatures);
(6) Product size: 46*38*27mm 1.81x1.5x1.06inch (excluding casing);
(7) Product weight: 42g (excluding shell).
3. Operation function description
(1) Learn coding operations
Jog mode: First remove the jumper on the controller, connect the power supply and click the controller\'s code learning button, then press and hold any key on the remote control. The controller\'s indicator light flashes to indicate successful code learning.
Automatic mode: Use a jumper to short-circuit the mode pins G and T on the controller. After connecting the power supply, click the controller learning code button, and then press and hold any key on the remote control. The controller indicator light flashes to indicate code learning. success.
Interlock mode: Use a jumper to short-circuit the mode pins G and L on the controller. After connecting the power supply, click the controller learning code button, then press and hold the A button on the remote control. The controller indicator light flashes to indicate learning. Code successfully. After learning the code, press the following key A to make the relay close, and press key B to turn the relay off.
(2)Working mode description
Inching mode: Press the button and the relay will close, release the button and the relay will disconnect.
Self-locking mode: Press the learned code button once and the relay will close. Press the button again and the relay will disconnect.
Interlock mode: Press button A on the remote control once to make the relay close, press button B once to make the relay disconnect, and press button A again to make the relay close.
(3) Code clearing operation
Press and hold the code learning button for 5 seconds. The indicator light will turn from off to on, indicating that the code has been cleared successfully and all remote control codes have been cleared.
4. Electrical parameters
Rated voltage: AC220V
Standby current: 3mA
No-load operating current: 3.5mA
Receiving frequency: 433.92Mhz
Working mode: jog, self-locking, interlocking mode
Output mode: terminal block
Control distance: >100 meters (measured in open space with high-power remote control)
Receiving sensitivity: -105dB
Maximum load power: 1000W
5. Precautions
(1) The working voltage cannot exceed the rated voltage.
(2) Keep out of reach of children.
(3) In an environment with relatively large wireless interference, the control distance may be reduced.
(4) Do not use it in a humid environment, otherwise the controller may be damaged.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:1 X Remote Control
1 X Receiver
